Virtual Devices
Release history
0.9.5
- Fix crash when removing device or mode(issue #133)
0.9.4
- Allow decimals for measure_temperature to be set
0.9.3
- Fix setting min & max target_temperature
- Also allow step-size to be set
0.9.2
- Own icons can be uploaded (issue #127)
- Allow min & max for target_temperature to be set (issue #116)
- Changed icon for quiet to make it same style as Speaker
0.9.1 Cancelled
0.9.0
- Fixes ability to set the energy consumption (issue #111)
0.8.9
- Added support for capabilities measure_battery, meter_gas, meter_water, and meter_rain in Sensor
- Added Norwegian translation (thanks to Allram)
0.8.8
- Support measure_power (thanks to @allram)
- Disabled Multi-modes
- Added classes blinds, curtain, sunshade, solarpanel, and doorbell
- Added classes vacuumcleaner, camera, remote, speaker
- Set Energy Consumption hardcoded to 0
0.8.7
- Improved pairing pages (thanks to @daneedk)
- added German translation (thanks to @philsniff)
- capabilities added to sensor (thanks to @daneedk)
- Added open-window icon to virtual-switch
0.8.6
- Lowered scale for target-temp up-to 50 (issue #94)
0.8.5
- Fixed icons of new devices in V2 (issue #77)
- Fixed no capability when not selecting other than default capability (issue #81)
0.8.1
0.8.0
0.7.5
- Support for motion and contact sensors (issue #67)
- Increase range for target_temperature (issue #53)
- Added capabilities to measure co, current, gust_angle, gust_strength,
luminance, noise, rain, ultraviolet, voltage, water, wind_angle, and
wind_strength (issues #26 and #66)
- Added capability to measure Energy (KWh) (issue #57)
0.7.4
- Support for boolean sensors (issue #61)
0.7.3
- Added lots of icons to multi-mode (issue #37)
- Added numbered icons to multi-mode (issue #10)
- Added icons to multi-mode for open and closed windows (issue #41)
- Added capability alarm_motion (issue #40)
- Added a Sensor (issue #26 and #32)
0.7.2
- A Multi-state now also has a previous_state (issue #47)
- A device that is turned on will not be turned on again (issue #42)
- Changing intensity affects the device on-off (issue #36)
- Mode changed is now also triggered when a mode is changed in a flow (issue #39)
0.7.1
- Multimode not triggered sometimes (issue #33)
- App keeps crashing (issue #35)
0.7.0
- Adding a measure_temperature and measure_power as sensor capabilities
0.6.8
- Fix for trigger & condition for same device (issue #27)
0.6.7
- Added Hue capabilities for lights
- Added A general trigger if one of the virtual devices (not yet modes) have changed
- Added Volume capabilities for tv and amplifier
- Added Lock
- Added House icon for modes
- Added target_temperature capability for coffee machine
0.6.6
0.6.5
- Added Multi-mode (issue #14, remainder)
0.6.4
- Added radiator icon
- Added Alarm-states (issue #14, partly)
- Added dim capability
0.6.3
- Added trigger card for modes to trigger on a change (issue #11)
- Fixed trigger card for status changed of virtual devices (issue #15)
- Added action cards to set mode without triggering device (issue #5)
0.6.0
- Rewrite for SDK2
- Removal of Obsolete Devices
0.5.4
- Fix crash-report: “Cannot assign to read only property ‘onoff’ of false” (issue #12)
0.5.3
- Adds Virtual Sunscreen device (Up / idle / down)
0.5.2
- Make states persistent over reboots
0.5.1
- Fix issue with action card for buttons
0.5.0
- Major re-factoring to keep the app lean, maintainable, and to prepare for future updates
- The class, capabilities, and icon can now be selected when creating the virtual device
- Unfortunately old devices must be added again (they will stop working in the next release)
0.4.0
- Added Buttons
- Added Relax and Manual Modes
0.3.0
- Added more devices and modes (thanks to ZperX)
0.2.0
- Use the switch in the ‘then’-column
0.1.0
- Use the switches status as a condition
- Multiple Virtual devices can be added
- First Device: a Virtual Switch